Welcome to Enterprise Engine Performance!

Fire-Ring Head Gasket Specs.

.105” Fire-Ring Dimensions

Typical 12/24V Head Gaskets measure .060”-.064” before they are crushed .  

(***This will vary slightly depending on the manufacturer along with what production date and location where the gaskets were produced***)

The desired protrusion on the Fire-Ring is right around .015” (+/- .001) after taking into consideration the thickness of the gasket and the depth of the groove cut.

Typically the groove depth needs to be in the .030”-.034” range depending on the thickness of the gasket being used.

 The groove O.D. when using the .105” Rings is typically 4.540”

***PLEASE NOTE THIS IS A ROUGH GUIDE ONLY, THESE SPECS NEED VERIFIED ON EACH AND EVERY APPLICATION DUE TO THE MULTIPLE VARIABLES INVOLVED***