1 Fluidamper 2 Spacers 2 Short Studs 1 Long Stud (the other long stud will come from the OE bracket) 2 Nuts (2 nuts will be reused from the OE bracket) 1 Bracket 1 Short Bolt
OE Setup:
Relocation Position:
Remove front cover/housing bolts, install long stud that was removed from original bracket and long stud supplied with kit.
Install long studs where front cover/housing bolts were removed.
Install Spacers on long studs.
Studs installed in bracket:
Install bracket with preinstalled studs.
Install Tach Sensor.
Relocated Crank Sensor with wiring attached to front cover bolts.
These bolts were installed where the original sensor studs were removed. Use the short bolt supplied with kit and 1 long bolt that was removed from the new sensor relocation.
We have SFI Bellhousing blankets available for both 5 and 6 speed applications.
