Welcome to Enterprise Engine Performance!

Engine Oil Additive, Red Line “Engine Break-In” Additive, Redline #81403

$14.95

Additional Order Comments & Instructions

Please enter special order instructions below such as part substitutions or valve relief depths/etc…..

SKU:81403 Red Line Break-In Additive Category: Tag:
  • Description
  • Reviews (0)

Product Description

Engine Oil Break-In Additive
  • Provides conventional motor oils with antiwear additives like zinc and phosphorus (ZDDP) necessary to protect against camshaft and valvetrain damage on break-in
  • Allow pistons rings to seat properly with less-slick oil, while antiwear additives protect other engines components to avoid excessive wear
  • Can also be used in conventional and synthetic oils during regular operation, providing an extra package of protection otherwise not found in most motor oils
  • 16oz bottle treats up to 12 quarts of motor oil–in many cases, one bottle can serve two engines or oil changes
  • Reformulated for improved frictional properties
  • Special detergents for improved lubricity and less detonation
  • Polyol ester base stocks provide more stability and film strength when exposed to excess fuel dilution
  • Each of these products has no less than 2200ppm of zinc and phosphorus for antiwear
  • Each race oil product is a multi-grade, offering 2-4% more power than oil of a similar viscosity – 20WT is a 5W20, 30WT is a 10W30, 40WT is a 15W40, 50WT is a 15W50
  • Improved protection at startup, lower oil temp, cleanliness
  • Remember to change these oils more frequently than regular motor oils
MORE TECHNICAL INFORMATION
Increases antiwear level per quart when using One Bottle (16oz.):

Capacity – Phosphorus – Zinc
15 quarts – 610 ppm – 736 ppm
12 quarts – 763 ppm – 920 ppm
10 quarts – 915 ppm – 1104 ppm
8 quarts – 1145 ppm – 1380 ppm
7 quarts – 1307 ppm – 1577 ppm
6 quarts – 1525 ppm – 1840 ppm
5 quarts – 1830 ppm – 2208 ppm
4 quarts – 2288 ppm – 2760 ppm
1 quart – 9160 ppm – 11040 ppm

Half Bottle (8oz.) when treating:

Capacity – Phosphorus – Zinc
12 quarts – 382 ppm – 460 ppm
10 quarts – 458 ppm – 552 ppm
8 quarts – 572 ppm – 690 ppm
6 quarts – 763 ppm – 920 ppm
5 quarts – 915 ppm – 1104 ppm
4 quarts – 1145 ppm – 1380 ppm

One Quarter Bottle (4oz) when treating:

Capacity – Phosphorus – Zinc
6 quarts – 382 ppm – 460 ppm
5 quarts – 458 ppm – 552 ppm
4 quarts – 572 ppm – 690 ppm
3 quarts – 763 ppm – 920 ppm

Bottle (16oz) contains:
33.8 grams total ZDDP (zinc dialkyldithiophosphate)
17,000 ppm, 7.8 grams Phosphorus (P)
20,500 ppm, 9.4 grams Zinc (Zn)
16.6 grams Sulphur (S)

Reviews

There are no reviews yet. Add a review